永磁球形电机的神经网络自适应控制算法

介绍了具有三维位置检测功能的三自由度永磁球形电机工作原理及其运动控制方法.结合球电机结构特性,基于XYZ 欧拉角和拉格朗日方程建立了球电机运动学及动力学模型.为了解决动力学模型建模误差、摩擦力和外界干扰等对球电机工作性能的影响,设计了神经网络逼近模型,并将其应用于球电机的控制之中.仿真结果表明这种控制方法与传统方法相比可以有效提高球电机的抗干扰能力,在建模误差比较大的情况下仍可以保证球电机的运动精度,其结果可以为进一步的球电机精密运动控制理论研究和实验方案设计提供借鉴和参考.      

A two-step robust adaptive filtering algorithm for GNSS kinematic precise point positioning

In kinematic navigation and positioning, abnormal observations and kinematic model disturbances are one of the key factors affecting the stability and reliability of positioning performance. Generally, robust adaptive filtering algorithm is used to reduce the influence of them on positioning results. However, it is difficult to accurately identify and separate the influence of abnormal observations and kinematic model disturbances on positioning results, especially in the application of kinematic Precise Point Positioning (PPP). This has always been a key factor limiting the performance of conventional robust adaptive filtering algorithms. To address this problem, this paper proposes a two-step robust adaptive filtering algorithm, which includes two filtering steps: without considering the kinematic model information, the first step of filtering only detects the abnormal observations. Based on the filtering results of the first step, the second step makes further detection on the kinematic model disturbances and conducts adaptive processing. Theoretical analysis and experiment results indicate that the two-step robust adaptive filtering algorithm can further enhance the robustness of the filtering against the influence of abnormal observations and kinematic model disturbances on the positioning results. Ultimately, improvement of the stability and reliability of kinematic PPP is significant.     

民用涡扇发动机起动过程改进的分段组合控制计划研究与试验

针对某型民用涡扇发动机,将n-dot闭环控制算法应用于涡扇发动机起动过程,设计了涡扇发动机起动过程开环与闭环分段组合的控制计划,仿真表明:涡扇发动机起动过程采用n-dot闭环控制算法在初始阶段会出现参数摆动的情况.为此,基于油气比作控制变量进行消喘的原理,对n-dot闭环控制算法进行了改进,以消除起动初始阶段的参数摆动.试验结果表明:改进后的分段组合的控制计划能够有效抑制参数摆动现象;并且,对于不同大气条件的起动测试,起动过渡态过程高压转子转速的数值差距不大于1.0%,延时不超过0.9s;而对于不同飞行状态的起动测试,起动过渡态过程高压转子转速的数值差距不大于1.0%,延时不超过1.2s,具有良好的稳定性和重复性.      

电机-变距螺旋桨动力系统功率优化控制

电动螺旋桨无人机应用越来越普及,但普遍续航时间较短,提高电动力系统效率、降低功率消耗是提高航时的主要措施。电机-变距螺旋桨动力系统（以下简称变距电动力系统）可同时改变转速、桨距两个量,存在桨距和转速的最佳组合,使系统功率最小。相比电机-定距螺旋桨动力系统,其在耗能方面具有特殊优势,但如何达到最小功率点,目前研究较少。针对上述问题,为提高计算效率,便于控制研究工作的开展,首先基于改进天牛须算法的BP神经网络训练得到变距电动力系统的神经网络代理模型。接着提出了一种变距电动力系统功率优化控制策略：在一定入流速度、拉力需求下,基于自适应扩展卡尔曼滤波-牛顿法实时优化桨距,并在一定桨距下利用模糊PID控制系统转速以达目标拉力,实现目标拉力需求下的最小功率控制。仿真验证结果表明,提出的功率优化控制策略鲁棒性更强、优化速度更快、收敛效果更好。     

复杂薄壁构件自适应加工工艺几何模型重构

随着制造理念和制造水平的不断提高,大量复合制造工艺背景下的近净成形叶片被应用到现役或在研的航空发动机中。该类叶片是典型的复杂薄壁结构零件,无精确定位基准,且成形一致性差。采用传统叶身定位,加工后的前/后缘、榫齿形状和位置精度均难以保证,从而导致产品一致性差,易超差与合格率低。针对以上问题,提出一种面向自适应加工的复杂薄壁结构零件工艺几何模型重构方法。首先,建立复杂曲面的采样点分布模型,快速获取叶片精确成型区域的位置和形状;其次,提出基于特征曲线相似变形的模型重构算法,精确重构前/后缘非精确成型区域的工艺几何模型;最后,通过精锻叶片自适应加工试验进行验证。试验结果表明：该方法可有效满足以精锻叶片为代表的复杂薄壁构件自适应加工要求。     

Solving Job-Shop Scheduling Problem Based on Improved Adaptive Particle Swarm Optimization Algorithm

An improved adaptive particle swarm optimization(IAPSO)algorithm is presented for solving the minimum makespan problem of job shop scheduling problem(JSP).Inspired by hormone modulation mechanism,an adaptive hormonal factor(HF),composed of an adaptive local hormonal factor(H l)and an adaptive global hormonal factor(H g),is devised to strengthen the information connection between particles.Using HF,each particle of the swarm can adjust its position self-adaptively to avoid premature phenomena and reach better solution.The computational results validate the effectiveness and stability of the proposed IAPSO,which can not only find optimal or close-to-optimal solutions but also obtain both better and more stability results than the existing particle swarm optimization(PSO)algorithms.     

A Backstepping Simple Adaptive Control Application to Flexible Space Structures

Although the simple adaptive control (SAC) is widely studied both in theory and application in flexible space structure control and other control problems, it is restricted by the almost strictly positive real (ASPR) conditions. In most practical control problems, the ASPR conditions are not satisfied. Therefore, based on the SAC theory, this paper proposes a backstepping simple adaptive control algorithm which suits the system with arbitrary relative degree with no need of parallel feedforward compensator. The proposed control algorithm consists of decomposition of the arbitrary relative degree system into a known subsystem and an unknown ASPR subsystem which are connected in cascade, design of constant output feedback controller for the known subsystem, and implementation of backstepping method and SAC of the unknown ASPR subsystem. Inheriting the characteristics of the SAC, this method can be adaptive online for the parameter uncertainties. Then, the application of the proposed controller to large flexible space structure with collocated sensors and actuators is studied, and the simulation results validate the proposed controller. It is a new strategy to apply the classical SAC to high relative degree plants.     

序贯结构的Sage-Husa自适应滤波及其应用

在分析已有的Sage-Husa自适应滤波算法的基础上,本文首先推导了两种量测噪声自适应估计方法的等价性。为充分利用组合系统中已知的部分量测噪声参数,提高滤波稳定性和精度,研究了基于序贯结构的Sage-Husa自适应滤波算法;当组合系统测量噪声参数均为已知时,为降低算法复杂度,提高Sage-Husa自适应滤波的鲁棒性,加入协方差匹配的方法对序贯结构的Sage-Husa自适应滤波算法进行改进;通过在序贯结构下采用相应的信息融合策略,充分利用组合系统的输出信息。将两种算法分别应用于MIMU/GPS/磁强计组合系统中,基于跑车实验的离线数据分析表明,第一种滤波算法的滤波稳定性较标准自适应算法在滤波稳定性上有明显提高;第二种改进的滤波算法既降低了算法复杂度,又提高了抗野值效果,有效保持了组合系统在干扰状态下的导航精度。     

全系数自适应控制器若干稳定性质分析

在更加一般的条件下对黄金分割反馈控制器在单输入单输出和多输入多输出特征模型中的稳定性和鲁棒性进行了系统分析,并在混合辨识背景下研究了投影梯度法在特征模型框架中应用时的输入状态稳定(ISS)性和参数估计误差的L2界.最终的结果进一步扩展了已有的结论,对整个系统的稳定性分析具有重要作用.     

加力燃油泵隔舌倒圆抑制分离的数值模拟

采用动态亚格子应力模型对加力燃油泵内非定常流场进行大涡模拟,探讨了原隔舌空蚀机理,并研究了不同倒圆半径下泵隔舌附近的瞬时流动规律及流量扬程特性.计算结果表明:小流量工况原隔舌处分离产生的强剪切涡会诱发空化,涡脱落形成的分离再附位置与空蚀破坏核心区域相符;小流量工况下,隔舌倒圆在扩散管内形成转向涡,消除了隔舌壁面分离绕流及附着剪切涡,4mm倒圆半径可以避免空化;设计流量范围内隔舌倒圆提高了泵出口扬程,流量越小扬程增幅越大,小流量工况时扬程增幅达3%.